Offering OBD tuning: Focus on performance enhancement and efficiency
Offer OBD tuning
OBD tuning is becoming increasingly important for modern automotive workshops. Workshops with little experience in this area in particular are faced with the challenge of offering their customers performance-enhancing and more efficient solutions. Below, we explain which product can be used to offer chip tuning and what you should consider when choosing a distribution partner. We also show you how to use the engine control unit via the diagnostic interface, known as the OBD interface, for software optimization. This is where our simple and user-friendly ECU Flasher Tool comes in, which was developed specifically for workshops with limited expertise.
At Autoflasher, we have specialized in the coordination of files and automotive control units for more than 25 years. Together with our team and worldwide distributors, we ensure that automotive workshops and chip tuning providers can work professionally on their customers’ vehicles. Discover our chip tuning with German software, high-quality flasher hardware, and sustainable support from professionals.
Learn more now
Sleeping horsepower, thanks to performance enhancement at the touch of a button
With our ECU flasher, boosting vehicle performance has never been easier. Our solution enables automotive workshops to optimize vehicle engine control efficiently without having to perform complex procedures. By simply connecting to the vehicle’s OBD interface, workshop employees can adjust the engine’s performance with just a few clicks. This is particularly advantageous for workshops that have not previously dealt extensively with chip tuning, but want to respond to customer requests as a good service provider.
Lower fuel consumption: Eco tuning for environmentally conscious customers
In addition to pure performance enhancement, our Autoflasher also focuses on eco-tuning. More and more drivers value environmentally friendly driving and want to reduce their carbon footprint. Our solution enables you, as a chip tuning service provider, to not only optimize performance but also reduce vehicle fuel consumption. By fine-tuning the engine parameters, workshops can enable their customers to drive in an environmentally friendly manner without sacrificing the desired performance.
As a self-employed person or company, eco-tuning is particularly interesting for you and your customers: even with just one vehicle, you can reduce fuel consumption on all journeys, which leads to lower costs at the pump. This luxury is particularly important for chip tuning providers in terms of sales: it’s no coincidence that Autoflasher supplies everything you need to optimize commercial and agricultural vehicles as well as passenger cars.
Simple operation for uncomplicated use
Our OBD tuning solution is characterized by its ease of use. You and your workshop staff do not need in-depth technical knowledge to use the tool effectively. The user-friendly interface guides you step by step through the optimization process, so that even less experienced technicians can perform OBD tuning without any problems. All adjustments are made automatically and via our German software. If you have any questions, our German and English-speaking support team is also available to assist you. This combination of services enables workshops to offer their customers an additional service without having to provide extensive training for their employees.
Optimal performance enhancement for vehicles – our tuning files set standards
For workshops, tuners, and passionate drivers, our tuning files not only offer fast availability but also first-class results. A performance boost is available for almost every engine and can be easily installed via the OBD interface using an ECU flasher thanks to fully customizable files. These files are conveniently available at any time via our database, giving you a clear advantage in terms of quality and service for your customers. Our many years of experience in processing and providing tuning files makes OBD tuning the standard for optimizing the software on your customers’ vehicles’ control units. We understand the needs of our partners and do everything we can to provide high-quality tuning files that meet expectations.
Autoflasher: Become a chiptuning service provider today
If you have acquired a taste for high-quality tuning files, please contact us today. We offer professional performance enhancements, manually adjusting your files to ensure high quality. Our tuning files are perfect for use in your customer’s vehicle. The process is straightforward: simply read out the control unit, upload it, and receive new files. Our wide selection of vehicles, models, and model years ensures that we can provide a comprehensive range of high-quality files for OBD tuning, allowing you to add chip tuning to your range of services in the future!
Mayk Biletti
Managing director
Our opening hours
Monday 7:00 a.m. – 5:00 p.m.
Tuesday 7:00 a.m. – 5:00 p.m.
Wednesday 7:00 a.m. – 5:00 p.m.
Thursday 7:00 a.m. – 5:00 p.m.
Friday closed
Saturday closed
Sunday closed
Follow us on social media
Topic-related contributions
- Eco Tuning Costs: A Look at Costs and Benefits
- Become a chiptuner: Achieve a lot together with chiptuning
- Offer map optimization: Expand your offering as a chip tuning service provider
- Car chiptuning: More power for your vehicle
- Buy Autoflasher Tool: Chip tuners will find what they are looking for here
Get started now with the
Autoflasher
Frequently asked questions &
their answers
How do you find the right control unit with the car flasher?
How do you find the right control unit with the Autoflasher?*
The Autoflasher guides you through the process of selecting the right control unit. Using a menu, you select the vehicle type, manufacturer, model, and engine step by step. The tool even automatically detects if you have accidentally selected the wrong control unit and automatically sets the appropriate protocol. This allows you to reliably find the right ECU without any guesswork.
Can you read out errors (error memory) with the car flasher?
No, the Autoflasher is not a diagnostic device and does not have a classic function for reading out error memories. However, if errors are located in the control unit itself—e.g., in the original file—these can be detected during writing and automatically removed. However, this does not replace a complete diagnosis.
Why do some functions not work via OBD?
Some control units are blocked from OBD access due to manufacturer protection or technical circumstances. In such cases, one resorts to bench or boot mode: With bench flash, the control unit is removed (without opening it) and connected directly via the pins. In boot flash mode, the control unit must be opened in isolated cases if neither OBD nor bench access is possible. The Autoflasher supports both modes and provides the necessary accessories so that even secured ECUs can be processed.
Can you code with the Autoflasher?
No. The coding of comfort functions (e.g., lighting, sounds, locks) is not part of the Autoflasher’s range of functions. The tool specializes in chip tuning and ECU/TCU programming – it is used to read, optimize, and rewrite engine and transmission control units. Classic coding or programming functions for on-board electronics (as offered by Carly or VCDS, for example) are not covered by the Autoflasher.
Is there a license requirement or license models for Autoflasher?
There is no mandatory ongoing license – the Autoflasher comes with no minimum term or subscription commitment. However, a time-limited update package is usually included with the purchase (often 12 months, for example), during which you receive all new protocols and vehicle support free of charge. After expiration, all functions available up to that point remain intact (e.g., Virtual Read or Reset to Original); for future updates, you can renew your subscription if necessary, but you don’t have to. In addition, the Autoflasher is available in different versions: master versions (for standalone tuners, full control over the tuning files) and cheaper slave versions (work with an external file service or master), so that everyone can choose the right model for their needs.
What functions does the Autoflasher offer?
The *range of functions* offered by the Autoflasher covers all important areas of chip tuning. You can use it to read and rewrite all common engine and transmission control units, with the tool automatically calculating the necessary checksums. It also supports *ECU cloning* (a complete backup/restore function, e.g. when replacing a control unit). In addition, control units can be reset to their original state or software versions can be specifically downgraded and upgraded, and existing error codes are automatically deleted after flashing. In short: all important functions for professional tuning and control unit repairs are combined in the Autoflasher.
Which vehicles is the Autoflasher compatible with?
The Autoflasher is compatible with a wide range of vehicles, from popular car brands to trucks, motorcycles, and even boats. Currently, there are around *40,000 protocols* for over *25,000 different vehicles* in the database. Thanks to this enormous coverage, you can work with most brands, models, and engines using a single device. And the range is constantly growing, as new vehicles and control unit protocols are added regularly.
Are there any updates for the Autoflasher?
Yes, the Autoflasher is continuously updated. New control unit protocols and vehicle models are added almost daily, expanding the range of functions. Updates are conveniently provided online via the software; all new features are included in the initial license period (usually 12 months from purchase). Even without extending your subscription, your device remains fully functional—you retain all the functions and protocols you have received so far. Only those who want further **new* enhancements after the included update phase has expired can optionally extend their update subscription.
How user-friendly is the Autoflasher?
The car flasher is designed to be very user-friendly, so even beginners can use it with ease. The case supplied contains all the accessories you need—just unpack it and get started right away. The software is intuitive and guides you step by step through the process (for example, you simply select your vehicle and the tool automatically takes care of the rest, such as the appropriate protocol), so that operating errors are virtually impossible. In addition, competent support is available to answer any questions you may have and provide you with quick assistance.
