Tuning per excellence

Autoflasher
a product of the special class

No minimum term or commitment

The all-rounder

1 unit: many functions.
Our Autoflasher can do all this

Take the strongest features from all the competitors on the market, add something on top and you have our Autoflasher.
With our Autoflasher, you can work with almost any ECU on the market. Around 40,000 protocols for more than 25,000 vehicles ensure this,
that you will get by with just one tool.

Read and write function

Due to its high compatibility, our Autoflasher can be used to read out and write to all common engine and transmission control units.

Checksum calculation

You save yourself the manual calculation of the checksums. The Autoflasher takes over this task for you and adapts the values if necessary.

OBD Flash & ECU detection

We are approaching the 30,000 protocol mark with great strides and new ones are added almost daily. With our tool, you work very effectively and don't lose any time. For even greater convenience, we have programmed our tool to recognise incorrectly selected control units and set the appropriate protocol without manual intervention.

ECU & TCU Cloning

The Autoflasher can do more than just increase performance. The tool has a true full-backup method and allows for a complete re-learning process, taking support and ECU repair services to a whole new level.

Back to original

With this function, many control units can not only be reset to their original state, but you can also downgrade or upgrade the current data status.

Error Goodbye

Our Autoflasher finds existing fault codes via the OBD-2 socket and removes them automatically directly after writing the tuning file. You do not need to do this separately

Bench Flash

For some control units, additional removal of the control unit is necessary. We supply all the necessary contents in our Autoflasher case so that the ECU can be conveniently removed, whose connection sits on the pins on the connector. Thanks to modern technology, it has not been necessary to open the ECU for several years.

Boot Flash

Occasionally, there are still ECUs where neither OBD nor the Bench method are used. These ECUs, which only make up a small fraction, can only be processed accordingly after opening the ECU. With the boot flash method, the connection is made on the circuit board.

Everything from
one suitcase.

The Autoflasher case we supply contains everything you need. Get started without any preparation time and read out the first control unit directly

UNIVERSELL

Already today, we can draw on a portfolio of several thousand vehicles and hundreds of ECUs that harmonise perfectly with our Autoflasher. However, we are not resting on our laurels, but are regularly expanding our range of protocols and ECUs.

0

CONTROL DEVICES

0

PROTOCOLS

0

VEHICLES

OBD

All the necessary data can be read out and imported via the vehicle’s diagnostic socket using the OBD connection.

BOOT

For booting, it is necessary to open and remove the engine control unit. There is a circuit board on the control unit. There you make the connection at 1 to 3 points.

BENCH

The engine control unit is also removed here. In contrast to booting, however, no opening is necessary, as the connection is made directly at the front socket.

Program
Automatic transmission

AutoFlasher specialises in providing the best automatic transmission unit (TCU) solutions, supporting a wide range of vehicles.

It incorporates innovative protocols for repair, imodication (tuning) and improves sustainability by enabling the reuse of otherwise unusable mechatronics.

TCU solutions are super fast, safe and stable.

High
compatibility

Our Autoflasher is compatible with all popular makes and models.

Vehicle data
Logging

With the integrated data recording function, all relevant data and parameters (such as boost pressure, injection, ignition, lambda value, etc.) are recorded and visualised in tabular form.

We never slacken
We are not satisfied with average

We are only satisfied with the best. That’s why our tools are equipped with the most modern standards and communication options with the control unit. Automatically saving your TriCore password and reading out the memory contents within seconds are just two advantages that will benefit you in the long run.

Autoflasher
always up to date

As soon as you start your Autoflasher with a stable internet connection, it will check for the latest version. If there is a newer version of the flasher software, it will be downloaded automatically and you will always be up to date.

J-TAG CONNECTION

One ribbon cable
Included with the case
contain

BENCH & BOOT CONNECTION

The case contains a cable
the connection via boat
and Bench at all
Control units
genutzt werden kann.
BDM CONNECTION

The case contains a
according to manufacturer standards
reinforced cable.
OBD CONNECTOR

The case contains a
according to manufacturer standards
reinforced cable.
14 VOLT POWER SUPPLY UNIT

The case contains a
according to manufacturer standards
reinforced cable.
USB CONNECTION

The case contains an
according to manufacturer standards
reinforced cable.

1 provider -
2 versions

Not every autoflasher is the ideal solution for every customer. In order to meet the needs of our customers in the best possible way, we have launched two variants on the market: the master and the slave variant.

Tell us which provider and for which purposes you use the flasher and we will tell you which flasher is right for you.

Lifetime
guarantee

With our products, you can expect only the highest quality and workmanship. With careful handling, the Autoflasher will easily last more than a decade. If, in exceptional cases, the unit does not run as desired, we will replace it for life. Except in the case of your own fault.

Trained customer service

We won't leave you out in the cold if you have unanswered questions. Via e-mail, live chat or ticket system and by phone, our well-trained service staff will take care of your concerns as quickly as possible. You will not have to wait longer than 1 hour. In some cases, we connect to your PC remotely.

Express
Shipping

We understand your desire to get started with your Autoflasher as soon as possible. To make this possible for you, we use the option of express shipping. As a rule, your case will be waiting to be used just 48 hours after you place your order. In Europe, delivery is free of charge. And is delivered insured via UPS.

Never before
was the solution

SO CLOSE